Status Indicator Light And Sounds - ECOVACS ROBOTICS W850 Manual De Instrucciones

Indicator
Status Indicator Light
flashes GREEN
Status Indicator Light
stops glowing
Status Indicator Light
flashes BLUE
Status Indicator Light
glows a continuous BLUE
Status Indicator Light
flashes RED
Status Indicator Light
glows a continuous RED
WINBOT emits beeps

5. Status Indicator Light and Sounds

Back-Up Battery is low and is charging. WINBOT will not clean until
the Back-Up Battery is properly charged.
The Status Indicator Light stops glowing when the Back-Up Battery
is fully charged. This is normal.
WINBOT 8 is powered ON and ready to be placed on the glass.
WINBOT 8 has successfully adhered itself to the glass and is ready
to clean.
WINBOT 8 has a problem. Please refer to section 6,
Troubleshooting, for details.
WINBOT 8 has been placed in Manual Override Mode. Please refer
to section 6, Troubleshooting, for details.
WINBOT 8 beeps in following situations:
WINBOT 8 is powered on.
WINBOT 8 finishes cleaning.
WINBOT 8 has a problem.
Description
17
EN