Pulse Width Modulation; Color Balance; Preset Functions; Reset Functions - Chauvet Professional MAVERICK STORM 1 WASH Manual De Instrucciones

Pulse Width Modulation

To set the PWM frequency, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select PWM Option.
3. Press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the PWM frequency, from 600Hz, 1200Hz,
2000Hz, 4000Hz, 6000Hz, or 15000Hz.
5. Press <ENTER>.

Color Balance

To set the maximum values of a given color in the mix, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Color Balance.
3. Press <ENTER>.
4. Use <UP> or <DOWN>, to select the color value to be changed, from Red, Green, Blue, or White.
5. Press <ENTER>.
6. Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value, from 100–255.
7. Press <ENTER>.
8. Repeat steps 4–7 until the color balance is set as desired.

Preset Functions

The Maverick Storm 1 Wash has 3 presets. Every time a setting is changed in the Maverick Storm 1 Wash,
the current preset is updated to include that change. To load a preset, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Preset Select.
3. Press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the presets, from PRESET A, PRESET B,
or PRESET C.
5. Press <ENTER>.
6. The selected preset will load, and all changes made to settings will save to that preset.
Presets can be uploaded to other Maverick Storm 1 Wash products through a DMX connection. To do so:
1. Connect the DMX Out of the product that has the desired presets to the DMX In of the product to
be updated.
2. Power on both products.
3. On the product with the desired presets, navigate to the
4. Use <UP> or <DOWN> to select Preset Sync.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select NO (do not upload settings) or YES (upload settings).
7. Press <ENTER>.

Reset Functions

To reset the pan, tilt, or all functions as if from startup:
1. Navigate to the
2. Use <UP> or <DOWN> to select Reset Function.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select the function to reset, from Pan/Tilt, Zoom, or All.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset).
7. Press <ENTER>.

Factory Reset

To restore the Maverick Storm 1 Wash to factory default settings, do the following:
1. Navigate to the
2. Use <UP> or <DOWN> to select Factory Settings.
3. Press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings).
5. Press <ENTER>.
Page 53 of 306
menu.
menu.
menu.
Setup menu.
Setup menu.
Setup menu.
Maverick Storm 1 Wash User Manual Rev. 2
Operation