Shure SBC210 Instrucciones Importantes De Seguridad página 28

Changing the Charger Module
Caution! Remove DC power and remove batteries when installing the charging
module.
1. Remove the 4 mounting screws that secure the charging module.
2. Pull the charger module to remove it from the housing.
3. Insert the replacement charger module into the housing (note the orientation of
the guide rails).
4. Insert the mounting screws (4 pieces) and tighten them to secure the charging
module.
Troubleshooting
Power LED off. DC power fault - check connection to power supply.
Ensure PS50 power supply is connected to an AC
power source.
Charge status LED Battery is not fully inserted.
does not illuminate.
Battery does not Battery discharged below 3.0 volts. Try another
charge battery.
Specifications
Battery Type
Charge Time
Operating Temperature Range
Battery Charging Temperature Range
Storage Temperature Range
Dimensions
Weight
Housing
Power Requirements
Up to 2 rechargeable Li-Ion batteries (SB900)
50%=1 hour; 100%=3 hours
-18°C (0°F) to +40°C (104°F)
0°C (32°F) to 60°C (140°F)
-29°C (-20°F) to 74°C (165°F), without batteries
44 x 86 x 116 mm (1.8 x 3.4 x 4.5 in.), H x W x D
425 g (15.0 oz.), without batteries or PS50 External
Power Supply
Cast and extruded aluminum
5.5 V DC, 2.72 A
3