Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To save energy, the fan will not work unless following two situations:
1.
The fan will work when the load is exceed 30% of the related power of the inverter.
2.
When the inside temperature of the inverter exceed 60 degree the fan will work.
About use extended cable:
1.
We do not recommend to use extended cable between the inverter and the battery, because it
will cause loss of DC electricity and affect the efficiency of the inverter.
2.
If must use extended we suggest you use high quality cable to reduce the loss of electricity.
Install and working environment.
While installing the follow situation are needed:
•
Dry: do not put the inverters in rain, fog, frosty; water and greasy dirt are forbidden to put on
inverters.
•
Temperature: please control the working temperature between 5~35°C.
•
Safety: do not put the inverters next to explosive, inflammable and fuel oil engine.
•
Ventilate: at least keep 10 cm space for ventilate and do not block the air-vent.
•
Dust: do not put the inverter in dust as too much dust will destroy the inverter.
Connection
•
Checking if the inverter is in ''OFF'' status ; connect battery with the supplied cable.
•
Ensure the battery voltage and the inverter input voltage matching; 12V inverter only work with
12V battery and 24V inverter only work with 24V battery if mixed will destroy the inverter.
•
Connect the positive terminal with the positive polar of the battery and the negative with the
negative polar and please keep the inverter in "OFF" status, that's very important for the
inverter.
•
Keep the connection tightly or will be very dangerous.
•
Checking the connection again before the next step.
•
Do not reverse connection or it may destroy the inverter.
•
Press the ''ON'' button, the green light on and the digital display start work; if the inverter alarms
please stop the inverter and check.
For safety. (please read carefully before using)
1.
Please do not operate the inverter while your hand in wet. Keep it away from the touch of
children.
2.
The temperature of the shell will be high after long time working, so do not touch it in case of
scalded.
3.
Do not put metal into the inverter in case of electric shock.
4.
Because inverter is easy to occur electric-arc, do not put the inverters in rain, fog, frosty, water
and greasy dirt are forbidden to put on inverters.
5.
While connecting with battery, if the battery acidic material touch the skin please wash with
water at once, if the acidic material go into the eye please go to the hospital.
6.
Please do not put metal on the battery, this will cause short circuit then destroy the inverter and
the battery.
7.
When insert then plug of the appliance into the AC socket of the invertir please keep your hand
away from the metal pin to avoid electric shock.
8.
Please do not put any AC electric appliance to the AC outlet of the invertir as this will destry the
inverter and may cause electric shock.
9.
Do not disassembly products, maintenance need professional.
Tabla de contenido
