Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Back panel picture & explanations:
6.
Earth terminal: Connect the ground with the yellow cable.
7.
"+'' terminal/red: connect this terminal to positive polar of the battery or other power supply with
the red cable.
8.
Heat dissipation fan: Intelligent control, only start work when the load reach 30% of the related load
or the internal temperature reach 60 degree (300W and 600W inverter only have one fan) .
9.
"-" terminal/black: connect this terminal to the negative polar of the battery or other power supply
with the black cable.
10. Remote control clamps: It allows to connect a remote control, such door oponer, or cable with
switch, to totally disconnect the inverter from the b attery, when it will be in "OFF" position, in the
way to save power losses at the battery, and as well to avoid any consumption due to inverter's
internal iron losses. There is no remote control clamp on 300-PSW model.
(The above picture just for reference, may have a little difference from the real products).
Instruction
Application:
•
Electric power tool series: electric saw, drilling machine, lapping machine, sandblast machine,
stamping machine, grass eliminator, air compressor.
•
Office equipment: Computer, printer, displayer, duplicator, scanistor, facsimile apparatus.
•
Household appliances: dust collector, fan, fluorescent lamp, filament Iamp, sewing machine.
•
Kitchen series: microwave oven, refrigerator, freezer, coffee machine, blender, ice machine, hot
oven.
•
Commercial installation series: metal halogen Iight, high voltage sodium Iamp, watercraft, cars,
solar energy and wind power generation.
•
Electronic Field series: TV, radio, game player, VCR, power amplifier, monitoring equipment,
servicer, satellite communication equipments.
NOTICE: While using please follow the related power of the inverter, do not over load. It is better to keep
the inverter work at 85% of its related power.
USB instructions
1.
USB is only for charging , no date exchange function.
2.
Before charging please check carefully if the charging current of the appliance is under the
inverters current, if it exceed the charging current of the inverter please do not use, or it may
destroy the USB port.
3.
Some appliance must charging with originaI charger, please don't charge with USB port.
Tabla de contenido
