Vermeiren Ina Manual De Instrucciones página 3

INSTRUCTION MANUAL
Grabrail Ina
1. Technical details
L
WARNING: Risk of unsafe settings -
only the settings described in
manual.
Make Vermeiren
Address Vermeirenplein 1/15,
B-2920 Kalmthout
Type Grabrail
Model Ina 30
(30 cm)
376
Length
mm
Distance grabrail
to wall (height)
Diameter flange
Weight 0,55 kg
Max. Load
Storage
temperature
We reserve the right to introduce technical changes.
Measurement tolerance +/- 15 mm / 1,5 kg
First of all we wish to thank you for the trust you
placed in us by selecting a VERMEIREN product.
Before using the grabrail, read the instruction
manual carefully: it will familiarise you with this
product.
Please remember that observance of our hints
would keep your product in an excellent condition of
preservation and it will function perfectly even after
years of use.
If you have any further questions, please consult
your specialist dealer.
To find a service facility or specialist dealer near
you, contact the nearest Vermeiren facility. A list of
Vermeiren facilities can be found on the last page.
2. Explanation of symbols
Maximum mass
CE conformity
Type designation
3. Check after delivery
Unpack your product and verify if the delivery is
complete. Following items should be included:
 Grabrail
 6 Screws
 6 wallplugs
 2 rubber gaskets
 Manual
Verify your product for transport damage. If you find
any damages after delivery proceed as follows:
 Contact the transporter
 Have a list made of any problems
 Contact your supplier
Use
this
Ina 40 Ina 50 Ina 60
(40 cm) (50 cm) (60 cm)
476 576 676
mm mm mm
80 mm
70 mm
0,65 kg 0,67 kg 1,00 kg
max. 120 kg
+5°C - +41°C
4. Intended use
The grabrails are available in different lengths from
30 to 60 cm.
They are designed as general support elements.
They are useable everywhere (*), including humid
environments.
(*) Only mountable on walls where the wall is
suitable to have a bar mounted on.
5. Assembly
L
CAUTION: Risk of injury – Check that the
grabrails are mounted securely to the wall,
these will influence the strength of the
grabrails.
L
CAUTION: Risk of injury – Check that the
grabrails are mounted to a good wall (strong
enough), these will also has influence to the
strength of the grabrails.
Please ensure that the grabrail is installed according
to this manual.
2. Drill the required holes in the wall with the proper
tools and the right drill bit.
3. Mount the delivered plugs accurate into the
holes.
4. Mount the 2 rubber gaskets.
5. Place the grabrail in the desired position against
the wall.
6. Turn the delivered screws into the wall plugs with
a proper tool. (Check that the screws are from
Inox, because these will be used in the
bathroom).
If you have any doubts, kindly contact
a professional to install the grabrail for you. Use the
installation materials which are delivered with the
grabrail.
6. Safety instructions
 Risk of burns – Be careful when using in extreme
hot or cold environments (sunshine, extreme
cold, saunas, etc.) for a sufficient amount of time
and when touching.
 The maximum users weight for your grabrail
is 120 kg.
 Check that the grabrails are mounted securely to
the wall.
 Check that the grabrails are mounted to a good
(strong enough) wall.
 Be sure that there are no electrical cables or
other tubes in the mounting area of the grabrail.
 The manufacturer cannot assume liability for
damage caused by overloading, collision or other
improper use.
7. Maintenance, inspection, cleaning
For the maintenance manual of the graibrails refer to
the Vermeiren website: www.vermeiren.com.
1
Ina
2016-12
1. Marque the
correct size of the
grabrail holes on
the wall - Put the
grabrail in the
desired position.