Maintenance Safety - Munters MJ150Y Manual De Instrucciones

MJ150Y Dehumidifiers
Humidistat Location
NOTE!
The humidistat should be mounted 1–1.5 m above the floor and positioned so that it is not exposed
directly to dry air from the unit or incoming moist air from opening and closing doors and windows. It
may not be placed close to a heat source or so that it is exposed to direct sunlight.
Maintenance & Fault finding
Maintenance
Safety
Component
Filter Clean filter housing and change filter as required.
Unit, general Check for physical damage and clean unit exterior if
necessary.
Check the outlets and hoses to ensure that they are not
blocked.
Humidistat Check sensor function and calibrate or replace if
necessary. Contact your Munters' product service
department as required.
190ALL-1033-A02.05
WARNING! The unit must not be opened by anyone other than trained and qualified
personnel.
WARNING! The unit must be unplugged from the mains outlet before carrying out any
Maintenance or Fault finding activities on the unit.
Inspection/Maintenance
3–6/12 Month intervals
Humidistat
1.5 m
Humidistat
Wet Air
Dry Air
Removing the
filter grating &
3
filter
Wet
Air
Dry
Air
1
2
9