Using The Dehumidifier With Climate App - Princess Smart Dehumidier 01.353120.01.001 Manual De Usuario

Fan mode:
In this mode the dehumidifier will only operate for air circulation and
the compressor will not run. The humidity will not be reduced in this
mode.
Water full:
If the water tank is full the full indicator will show red and an alarm will
sound. Empty and replace the water tank and the dehumidifier will
automatically resume its set operation.
NOTE: The compressor will not begin until 3 minutes has passed.
Automatic Defrost:
It is possible that the dehumidifier can produce internal frost. This is
normal and the dehumidifier will automatically go into defrost mode
when frost is detected to reduce this.
The compressor will turn off and the fan will continue, once the
defrost has finished the compressor will start and normal operation
will continue.

USING THE DEHUMIDIFIER WITH CLIMATE APP

The dehumidifier can be used manually with its built-in controls or
you can use a smart phone to control it. Before you begin, ensure the
Homewizard Climate app is downloaded. The Homewizard Climate
app is available on Android and iOS.
Pair your dehumidifier to HomeWizard Climate app
• Make sure your dehumidifier is powered.
• Open HomeWizard Climate APP.
• Create an account or if you already have a HomeWizard account,
please log in using those details.
• Click "Add new Climate Device" to add a new device.
• Select the device you wanted to connect.
• Follow the instructions on the app to connect the dehumidifier.
Instruction manual
EN
9