Premier SX-5476TVD Manual De Instrucciones página 19

1. Hold the plug well when you plug the power cord in or out.
2. Please do not put the AC power cord near any heat source equipment.
3. Please do not place any heavy objects on the AC power cord.
4. Please do not overhaul the AC power cord.
5. This unit belongs to
6. There is CLASS I
7. This product contains a low power laser device. In order to keep safety, please do not open the
unit to expose the inside parts. If there is some problem need to be repaired, please let the
professional person check and repair it.
PLACEMENT AND MAINTAIN FOR THE UNIT
1. Please do not put the unit in a sealed place or cover something onto the unit, to avoid the unit
damaged by its inside temperature's abrupt rising.
2. Please do not expose the unit under the sunshine directly or place it near the heat source equipments.
3. Please do not place the unit near the magnetic field such as speakers etc.
4. Please do not place any container with water or fire liquid. If there is any liquid in, please plug out the
power cord and contact with the professional repairer.
5. Please do not open the unit to contact the inside components. Otherwise it may cause electric shock
or unit damage. If need any repairs or adjustment, please provide this unit to the professional person.
6. Please put the unit on the horizontal surface. Please do not put any heavy object on the unit.
7. When the unit pauses, please set it to the standby state. If you do not want to use the unit for a long
time, please take off the power cord from the AC power socket, and take out the Li-battery from the
unit.
8. Do not put your fingers or other objects into the unit.
9. Under the following circumstances, there will be condensed dew on the Lens:
1). When the heat source equipment was just activated.
2). In a very damp room or a room with vapor.
3). When the unit is just moved from a colder place to a hotter place.
10. Pull the plug out of the socket before cleaning the unit. Use a piece of wet cloth for cleaning. Please
P-2
Protection of Power Cord
CLASS I laser product.
product mark on the rear panel.