AURO PVI-3.0-TL-OUTD Manual De Instalación Y Configuración página 34

model
input paRameteRs
nominal dc power [kW]
max. Recommended dc power [kW]
operating input Voltage Range [V]
full power mppt input voltage range (symmetrical load) [V]
full power mppt input voltage range (asymmetrical load) [V]
absolute max. input Voltage [V]
activation voltage "Vstart" [V]
no of independent mppt trackers
max. input power, each mppt [kW]
no. of dc inputs
max. dc current, each mppt [a]
dc connection
input pRotection
Reverse polarity protection
fuse rating, each input (-fs suffix versions only)
dc side varistors
pV array insulation control
dc switch (-s/-fs suffix versions only)
output paRameteRs
nominal ac power [up to 50°c, kW]
max. ac power [kW]
ac grid connection
nominal ac Voltage [V]
ac Voltage Range [V]
nominal ac frequency [hz]
max. ac line current [a]
ac connection
line power factor
ac current distortion [thd%]
output pRotection
ac side varistors
ground fault protection (ac + dc leakage current)
enViRonmental paRameteRs
cooling
ambient temp. Range [°c]
opertaing altitude [m]
acoustical noise [dBa]
environmental ip Rating
Relative humidity
mechanical
BoX dimensions [h x W x d]
overall dimensions (whit flanges) [h x W x d]
Weight [kg]
(***) Limited to 10000W for Benelux.
photovoltaic inverters
appendiX c - technical data
pVi-10.0-tl-outd
380-750 (@ 6,8kW) / 195-750 (@ 3,5kW)
360 nominal (adjustable within the range 250Vdc-500Vdc, independently/each input)
12 x Weidermüller / MultiContact Ø 4mm (6 male - positive input + 6 female - negative input)
in PVI-10.0/12.5-TL-OUTD and in PVI-10.0/12.5-TL-OUTD-FS version
8 x Weidermüller / MultiContact Ø 4mm (4 male - positive input + 4 female - negative input)
Conductor cross section: 4-6mmq/AWG12-10 - Cable Ø w/insulator: 3-6mm
320-480Vac (may vary to comply with regulations in each country)
16,6A per phase (19A short circuit)
Conductor Cross Section: Solid: 0,5-16mmq / Stranded: 0,5-10mmq / AWG20-6
-25 / +60 (output power derating above 55 °C)
10,3
11,4
0,7xVstart - 850 (580 nominal)
300-750
900
2
6,8
6 (3 each MPPT, optionally fused) in PVI-10.0/12.5-TL-OUTD
and in PVI-10.0/12.5-TL-OUTD-FS version
4 (2 each MPPT) in PVI-10.0/12.5-TL-OUTD-S version
18 (22 shortcircuit)
in PVI-10.0/12.5-TL-OUTD-S version
Mating cable connector included
Yes
10Adc / 900Vdc
4 ( 2 for each MPPT ), thermally protected
according to VDE0126-1-1
Integrated (Rating: 1000Vdc / 25Adc)
10
11(***)
3 phase 400Vac 50Hz with or without neutral (3 or 4 wires) + PE
400V
50
Screw terminal block
Cable Gland: M40 - Cable Ø: 19-28mm
>0,995
<2% at rated power with sine wave voltage
3, star connected to common point, plus gas arrester to ground
according to VDE0126-1-1
Natural cooling
-25 / +60 (output power derating above 50 °C)
2000
<50 @1mt
IP65
0-100% condensing
645 x 645 x 211
716 x 645 x 224
38
pVi-12.5-tl-outd
12,8
14,3
360-750
445-750 (@ 8kW) / 270-750 (@ 4,8kW)
8
12,5
13,8
20A per phase (22A short circuit)