Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
SPECIFICATIONS
Model
Loudspeaker
Rated Power (RMS)
Power taps 100V
Power taps 70 V
Impedance
Sensitivity SPL (1 W / 1 m)
Sound Pressure SPL (6 W / 1 m)
Freq. Range
Dispersion 1 kHz / 4 kHz
Dimension (mm)
Weight
Finish
Colour
Mounting
Certification
Power selection
INSTALLATION GUIDE
Step 1 – Dismantle the three screws on the side of the speaker.
Step 2 – Remove the upper cover.
Step 3 – Remove the two lateral metallic plates in order to let free the input and output cable holes.
Step 4 – Install speakers line through one of the holes and connect cables to IN+ and IN- of screw terminal.
Step 5 – Continue with the speaker line connection from OUT+ and OUT- using the remaining hole.
SPECIAL SPEAKER
WARNING:
⋅ Installation by qualified personnel only.
⋅ Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
⋅ Ensure that all speakers have the same polarity with
respect to each other.
⋅ Do not select another tapings if the speaker is in use.
⋅
No naked flame sources, such as lighted candles,
should be placed on the apparatus
WSM-5061
5" bicone
6 W
6 W, 3 W, 1'5 W & 0'75 W
3 W, 1'5 W, 0'75 & 0'375 W
1k7 Ω, 3k3 Ω, 6k7 Ω & 13k3 Ω
91 dB
99 dB
150 ~ 18.000 Hz
165º / 70º
163,5 x 163,5 x 60 (height)
2,1 kg
Plain steel
White (RAL 9010)
Screws
BS-5839, part 8
Transformer taps
WSM-5061VA
.
