Installation Of Mercury Lamp House; Installation Of Mercury Lamp - Auxilab HBF001 Manual De Instrucciones

c) Installation of mercury lamp house
Steps:
1. Release the lamp house locking ring
2. Insert into lamp house as per the direction of the arrow
3. Lock and tighten the locking ring
d) Installation of mercury lamp
release the screw of lamp house holder and remove the lamp house holder carefully, release
the locking screw with screwdriver and put into the lamp tube (please note the positive and
negative pole of lamp tube), tighten the locking screw, then put the lamp house holder into the
lamp house and tighten the screw of lamp house holder. Please be careful in operation and don´t
damage the lamp tube.
Manual de instrucciones- Instruction´s manual REF/CODE: HBF001
30