Measurement Operation - Ega Master EGATRONIK Manual De Instrucciones

Number
1
2
3
4
5
6
7
8
9
10
11
12
Warning!
- To reserve battery, the USB feature will be automatically off when the Meter is restarted.
The other setting remains unchanged.
- The Time will be off after the HOLD feature is enabled. The time will be on again after
existing HOLD mode.
A. RPM Measurement (see figure)
Warning!
- Do not point laser directly at eye.
- When carrying out measurement, the distance must be more than 50mm.
- To avoid hurt yourseolf or damage to the meter, do not let speedy rotary object to touch the
Meter.
To carry out RPM measuremnet, follow the following procedure:
1. Apply a piece of reflecting tape to the object under test.
2. Position the Meter on a flat place. Hold the Meter 50~200mm from the Tachometer light
source to the object under test.
DISPLAY SYMBOLS (see figure)
Meaning
Unit of Tachometer
Unit of Counts
The battery is low.
Indicator of Sleep Mode
Measurement of RPM and Counts
Data Hold is on
Display of Maximum reading
Display of Minimum reading
Display of Average reading
USB is on
Display of Measurement reading

MEASUREMENT OPERATION

Time
15