Overall Dimensions (Mm) - Xpelair Simply Silent C4S Instrucciones De Instalación Y Mantenimiento

This appliance is intended for
connection to fixed wiring. Check
that the electrical rating shown on
each fan matches the mains supply.
THE APPLIANCE IS DOUBLE INSULATED
AND DOES NOT REQUIRE AN EARTH
CONNECTION.
All installations must be supervised by a
qualified electrician. Installations and wiring
must conform to current IEE Regulations
(UK), local or appropriate regulations (other
countries).
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning the use of the
appliance in a safe way and
understand the hazards
involved. Children shall not
play with the appliance.
Cleaning and maintenance
of the appliance shall not be
made by children.

Overall Dimensions (mm)

All Xpelair Simply Silent™ Contour
AC fans have the following features:
• Two speed extraction
(Selectable at installation)
• Built-in back draught shutter
C4S/C4R - Operate the fan using an on/off
switch (not supplied).
C4PS/C4PR - Operate the fan using an integral
pull-cord.
C4TS/C4TR* - Built-in timer operates fan for a
preset delay from 30 seconds to 30 minutes.
C4HTS/C4HTR* - Operates when triggered
automatically by the integral humidity sensor, or
by using an external on/off switch (not supplied).
In automatic mode: the built-in timer
automatically operates the fan for a pre-set
delay time from 30 seconds to 30 minutes
once humidity drops below the pre-set Relative
Humidity (RH) value.
External operation: When switched off using the
external on/off switch the fan continues to run for
the preset delay from 30 seconds to 30 minutes.
* Factory settings: Timer 15 minutes, RH 75%
Where to locate the fan.
• Locate it as high as possible.
• At least 110mm from the edges of
the mounting surface to the centre
of the hole.
• As far away as possible from and opposite to
the main source of air replacement to ensure
airflow across the room (e.g. opposite the
internal doorway).
• Near the source of steam or odours.