Tabla de contenido
Idiomas disponibles
Idiomas disponibles
12
Quick Start Guide
External USB
If you are using an external HDD 2.5'', please
use the USB cable provided with your HDD for
best performance.
Zappiti Pro 4K HDR
Using Internal Drive
To insert the internal 3.5'' SATA HDD, please open the rack door, then insert the drive into the inter-
nal enclosure until 3/4, then complete the installation by closing the door. This operation will complete
the installation of the disk into the rack. The Zappiti media player is compatible with drives formatted
in NTFS, ExFAT, FAT16, FAT32, HFS, EXT2/3. It is not possible to format hard drives via the Zappiti.
You must use a computer for this purpose. In case of NTFS GPT, please use 64 Ko allocation tables.
***Note: Please make sure that your hard drive is correctly formatted before you insert it in the tray.
More info: zappiti.uservoice.com/knowledgebase
Pre-formated HDDs are
available on sale here:
store.zappiti.com
Using SD / MMC Memory Cards
To use a memory card, insert it in the memory card slot located on the left side of the media player. It will be
detected as USB device (USB icon on the home page). Some SD memory cards may not be recognized
by the player or may work incorrectly ; in such case, please use a different model of memory card.
Connecting USB Drives
You can connect your USB drives to one of
the available USB ports. If you want to play
video files, USB 2.0 is enough to support very
high bitrate (up to 480 Mbps) and more
reliable than USB 3.0. If you want to transfer
files, you can use the USB 3.0 or USB
Type-C ports.
***Note: A dedicated USB icon located on
the home page can help you to detect if the
drive is connected correctly.
Power provided by USB ports may not be
enough to allow the USB drive to function
correctly; depending on the drive. Please do
not disconnect or switch off the USB drive
External HDD
during write (copy / transfer) operations.
The Zappiti is compatible with UASP HDD
docking stations as well as USB hubs.
Zappiti Front View
Open the tray and insert the HDD,
keeping the connectors inside the bay.
Capítulos
Tabla de contenido
