Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CAUTION
DONT'S
1.
Do not allow children to touch the appliance when ironing.
2.
Do not leave the appliance unattended when it is connected to a main supply outlet.
3.
Do not use an extension power cord set unless it corresponds with your local manu-
facturing standards.
4.
Do not add perfume, vinegar or anything other than water into the water tank; this
can seriously damage the appliance.
5.
Do not immerse the appliance in water or any other liquids.
6.
Do not use the appliance if it is damaged or performs abnormally.
7.
Do not use the appliance if it has been dropped, if there are visible signs of damage
or if it is leaking.
8.
Do not touch the iron rest during or just after ironing. It is hot!
9.
Do not roll the power cord or supply cord around the iron unit or base for storage
until it has cooled down completely.
10. Do not attempt to open the water tank or dismantle any part of the appliance, there
are no serviceable parts inside.
11.
Do not open the water inlet cover during use. See instructions for the safe refilling of
the water tank.
12. Cleaning and user maintenance should not be done by children without supervision.
13.
Do not touch the surfaces marked with this symbol during or just after ironing. The
appliance will be hot! (Please refer to the following figure 1 and figure 2)
14. Do not let the cord touch hot surfaces. Let the iron cool completely before putting
the iron away. Coil the cord loosely around the iron when storing.
15.
Do not operate the iron with a damaged cord or in the event the iron has been
dropped or damaged.To avoid the risk of electric shock, do not disassemble the iron.
Take it to a qualified serviceman for examination and repair. Incorrect assembly
might result in a risk of electric shock when the iron is used after reassembly.
16. To avoid a circuit overload, do not operate an iron on the same circuit with another
high wattage appliance.
07
Tabla de contenido
Solución de problemas
