Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTRUCTION
Before connecting the speaker, make sure the system is off and the controls on the
minimum level.On the contrary the system could damage.
1.-Plug the
AC plug to electric
power and to the speaker.
2.-Plug the microphone on the "MIC"input with a 6.3 connector or Canon.
3.-Plug an auxiliary system (CD,DECK,MP3,MP3,DVD.etc) on " LINE IN" input
4.-Turn on the systems. A green LED light up on the speaker to indicate it is on.
5.-Set the volume on the middle level on the MIC and LINE IN input.
6.-Increase little by little the master volume (place on the right side of LINE OUT"
connector)
7.-Set TREBLE and BASS controls to equalize the sound.
8.-A red LED light up when the system detects overload power. You must decrease the
volume.
Caution
Do not close the microphone to the speaker, it can cause feedback echo and it damages
the system.
EXTRA FUNCTIONS
L/R channel ( RCA )
as LINE OUT can handle an amplifier or even another unit, in
cascade.
On the bottom of the speaker there is a hole to place a stand.
OPERATING PROCEDURES FOR BLUE CONNECT FUNCTION
Step 1 :
Push the bottom " MODE" , until to find " Blue-connect " on the display,
otherwise "no-b" on the display.
Step 2: Turn on smart phone bluetooth function , search for speaker box Blue connect
---
" PREMIER " ,
input 4 digits code " 0000 " to finalize the connection of Blue
connect between smart phone and speaker box.
Step 3:
Once the Blue connect is connected between smart phone and speaker box,
play the music on the smart phone,
then please enjoy the big power sound from
PREMIER speaker box !
P-2
Tabla de contenido
