Kesser 42 Manual De Instrucciones página 28

Idiomas disponibles
  • ES

Idiomas disponibles

Operation
Plug the power cord into a 220-240 volt outlet. Make sure the outlet is in good condition and
that the plug is not loose. NEVER exceed the maximum current for the circuit. DO NOT
connect other devices to the same circuit.
Cleaning:
 Turn off the heater and unplug it from the outlet before performing any cleaning or
maintenance work. Wait at least 10 minutes so that all components can cool down properly.
 Use a vacuum cleaner or dust frond to keep the heating and ventilation area free of dust
and dirt.
 The exterior of the fireplace should be cleaned with a damp cloth or dust cloth.
Do not use abrasives or liquid sprays.
WARNINGS AND PRECAUTIONS
WARNING To avoid electric shock, open the back wall of the insert only when the power has
been turned off. And the mission was unplugged.
WARNING All electrical repairs to this electric fireplace. Should only be carried out by a
qualified technician.
WARNING Repairs to the electrical wiring may only be carried out by a qualified technician.
And must also
comply with local building codes.
WARNING Do not use this electric fireplace again if one of the following cases has occurred:
Water damage. When insert
has been dented or dented. If the power cord is damaged. When the power cord gets hot,
when the device smokes or smells of smoke.
Note: When the heat function is used for the first time. A slight smell may be present. This is
normal and should
may occur again unless the heating element is not used for a long time and dust can
accumulate on the heating element.
Technical Specification
Power supply: 220-240V/50-60Hz
Rated power: 900 W/1800 W
Safety shutdown
This unit is equipped with a safety shutdown, which is activated in case of overheating
of the fire (for example, due to blocked ventilation openings). For safety reasons, the
fire is NOT automatically reset.
To reset the device, unplug the device for at least 15 minutes. Reconnect the power
supply to the mains and turn on the device.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
28
www.eshopping.de
loading

Este manual también es adecuado para:

5060