MPM MOD-70 Manual De Instrucciones página 32

EN
ASSEMBLY (DISASSEMBLY) OF THE VACUUM CLEANER
CAUTION! Do not operate the vacuum cleaner
when it is not assembled!
CAUTION! Make sure that you do not damage
the delicate connectors powering the electric
brush while assembling the pipe and accessories.
1. Assemble the electric brush (4) to the aluminium
pipe (3). Then assemble the aluminium pipe (3)
with the motor module (2). Finally, assemble the
battery (1) with the motor module (2) (fig. 1).
2. In order to disassemble the vacuum cleaner act
similarly to the first point.
PARKING THE VACUUM CLEANER
SWITCH ON THE HANDLE
The MOD-70 vacuum cleaner is provided
with a handle that allows the vacuum cleaner
to be fixed to the wall. In order to use the
handle, fix it to the wall.
1. Choose a suitable
place at the right
height to
modate the vacuum
cleaner
with the pipe (3) and
the electric brush (4)
Makes sure that no
electrical cables have
been laid in the wall
at the chosen loca-
tion.
2. Place the bracket (5) on the wall and mark the
hole positions on the wall with a pencil (fig.2)
3. Drill holes at the marked locations, insert the
wall plugs, apply the handle and screw in the
screws. Park the vacuum cleaner and accessories on the screwed handle (5).
BATTERY CHARGING
CAUTION! Charge the battery before using the vacuum cleaner for the first time. The time re-
quired to charge the battery is approximately 4.5 – 5.5 hours.
CAUTION! Only charge the battery with the supplied charger. While the battery is charging, the
vacuum cleaner cannot be started.
There are two ways in which the vacuum cleaner can be connected to the charger in order
to charge the battery. Charging the battery alone or charging the vacuum cleaner in the
wall-mounted handle:
1. Press the key and slide the battery (1) out of the motor module (2) (fig.3).
32
fig. 2
accom-
together
fig. 1