Philips ADD6920 Manual Del Usuario página 5

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
• The dispenser can only be installed and used indoor, and with power supply of reliable grounding.
• For rst time use, or if the machine hasn't been used for a long time, ll the raw water tank and
discard all the ltered water. Repeat this twice.
• Always use certi ed elements and accessories for the repairment and maintenance of the
dispenser.
• Organic solvent such as gasoline shall not be used for wiping the housing of the dispenser.
• If cleaning is required, please gently wipe the surface of the product with a wet cloth after it is
disconnected from power supply.
• If there is any abnormality, unplug the product from power supply immediately, and do not leave
the defective dispenser in working mode.
• With upgrade of the product, certain words or pictures on the manual may be di erent from the
actual product, and the actual product shall govern in this case.
• If the user intends to extract ambient water or water of 45°C immediately after extracting hot
water, some hot water may come out at the beginning, if so please watch out to avoid being burnt
by the hot water. It is recommended to extract ambient water for 10 seconds to cool down the
heating element.
• It is recommended to discard the ltered water if the machine hasn't been used for over 24 hours.
• If the power cord appears to be damaged, please stop using the product. To avoid risks of danger,
the power cord must be replaced by personnels authorised by the manufacturer.
• Do not disassemble or repair the dispenser by yourself, nor hand it over to any person not
authorized to repair, as improper repairing may cause risks of danger.
• The manufacturer will not bear responsibility for any consequences that are results of failure to
operate the appliance in accordance with the above guidelines.
02
loading

Este manual también es adecuado para:

Add6920bk