Idiomas disponibles
Idiomas disponibles
OPERATION
1. Place the diffuser on a firm, flat and level surface, about 10 cm away from the wall.
2. Remove the water tank cover.
3. Fill water tank with cold tap water and NEVER fill tank above the MAX line (Max. 150 ml).
You can also add drops of your preferred essential oil into the water.
4. Replace the water tank cover.
5. Connect the diffuser to the power adapter through the USB cable. Plug the power adapter into the
mains socket.
OR
Connect the diffuser to the computer through the USB cable.
6. Turn the diffuser on by pressing
The diffuser will produce mist.
NOTE: The diffuser will operate continuously for approx 4 hours and then automatically switch itself off.
When the water runs out, the diffuser will not produce mist but keep working. Please fill
the tank with water or switch the unit off.
CLEANING AND MAINTENANCE
Before cleaning, turn off the diffuser and disconnect the USB cable from the diffuser.
Remove the water tank cover.
Clean the water tank under running water and wipe it with a soft cloth.
Clean the water tank cover with a soft damp cloth. DO NOT IMMERSE THE COVER IN WATER.
NOTE: Never allow water or any other liquid to come into contact with the power button.
Storage
Make sure the diffuser is dried completely before storing.
Store it in a cool dry place.
SPECIFICATIOINS
Input voltage: 5V
Power: 3.5W
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur
as a result of product improvement and development.
.
Kesa Electricals © UK: EC1N 6TE
EG2
07 / 08 / 2012
