Steinberg Systems SBS-EC-20S Manual De Instrucciones página 51

IMPORTANT MESSAGE: Do not overcharge the battery – disconnect the
charger after battery had been fully charged Overcharging can result in
acid leaking from or damage to the battery!
Trouble
Blank Screen
No signal
The camera has
weak or no light
No recording
Record abnormity
Flashing pictures
TROUBLE SHOOTING
1. Change fuse.
2. Recharge the battery.
3. Check power line and connect it again.
1. Read the manual again and reconnect it.
2. Check the camera head and screw down.
3. Clean the camera pins and the connection area on PCB
Board into the hole.
4. Check the pins and find if they are in the same level.
Press LED+to the adjust the brightness.
1. Press the "Video" button and change to Video2.
2. Press POWER button and the monitor indicator light is green.
3. Use another USB disk /micro SD and try again.
Shut off the unit and restart the unit with the right steps.
1. Deficiency of the battery power. Please recharge the battery
2. Misuse of the charger cable and power cord: switch the
Reason / Solution