Idiomas disponibles
Idiomas disponibles
Adjustments
Adjustment menu
Contrast
: Adjust the screen contrast to match the brightness level in the room.
Pressing the [p key toggles between brightness and contrast.
| Direct operation]
Even if the menu screen does not appear, the contrast can be adjusted by pressing
the 3 or € key. If the & and € keys are pressed at the same time, the
maximum level (100) will be set.
Brightness
! Adjust the brightness to match the brightness level in the room so that the level
will be easy to see.
Pressing the [
2
] key toggles between contrast and brightness.
Note: If the & and 6 keys are pressed at the same time on the Brightness
adjustment screen, the standard level (50) will be set.
HI Size & Pos. !
Press the [
2
] key to select the zoom
/
horizontal position
/
horizontal size
/
vertical
position / vertical size adjustments.
Press the [Tj key to save the adjustment.
d
Zoom ! Both the horizontal and vertical size of the image can be adjusted at the same
time: however, the aspect ratio cannot be changed.
Press the 9 key to make the image smaller, the € key to make it larger.
O H. Position !
The horizontal position of the image can be adjusted.
_
Press the S key to move it to the left, the ►} key to move it to the right.
E3 H. Size !
The horizontal size of the image can be adjusted.
Press the @ key to make the image smaller, the K key to make it larger.
Note: Setting the image in the center of the screen to start will make the
adjustment easier.
m
V.
Position
I The vertical position of the image can be adjusted.
_
Press the 9 key to make it downward, the ►S key to move it upward.
m
V.
Size !
The vertical size of the image can be adjusted.
Press the S key to make the image smaller, the ►) key to make it larger.
Note: Setting the image in the center of the screen to start will make the
adjustment easier.
j) (I Geometry
:
Press the
CD
key to select the vertical pincushion
/
side pincushion balance
/
trapezoid / parallelogram / Geometry 2 adjustments.
Press the Q] key to save the adjustment.
) 1
V.
PinCUShion
; The image can be adjusted for barrel distortion.
Press the £i key to decrease the Pin / Barrel distortion of the image,
the K key to increase it.
(~T
Side Pin.
Bal.
! The image can be adjusted for the side pincushion balance to the left
and right. Press the (ji key to expand to the left of the image, the €
key to expand it to the right.
/~\
Trapezoid
!The image can be adjusted for trapezoidal distortion.
Press the !◄ key to make the top edge narrower, the € key to make the
bottom edge narrower.
r~7
Parallelogram
!The image can be adjusted for parallelogram distortion.
Press the & key to collapse the parallelogram to the left, the 6 key
to collapse it to the right.
^ ^ Geometry 2
I Press the 6 key to change the sub OSD screen.
Press the [D key to select the Top Corner / Bottom Corner / S-Curve 1 /
S-Curve 2 adjustments.
1
f Top Comer !
The image can be adjusted for vertical pincushion distortion in the
top corner.
J
i Bottom Corner ;
The image can be adjusted for vertical pincushion distortion in
the bottom corner.
51
S-Curve
1
! The image can be adjusted for vertical pincushion distortion in the S-
Curve 1.
. .
[i <=> n
52 S-Curve 2
! The image can be adjusted for vertical pincushion distortion in the S-
□ <*> □
10
