Enlaces rápidos
Installation instructions
Rim Magnet Simulator for
SpeedBox 1.2 Bosch (Smart System)
conectors
EN – PLEASE NOTE:
▶ During installation, metal parts in the motor frame area, cables, or internal
fillings of the e-bike frame might interfere with the signal of the Rim Magnet
Simulator. In some cases, removing the frame filler may be necessary.
▶ When searching for the signal, it is recommended to set the derailleur to
a medium gear.
▶ The signal range extends up to 30 mm from the motor.
If an error occurs, please follow these steps:
1. Leave the Rim Magnet Simulator in the same position or adjust it as needed.
Refer to the provided picture for the ideal signal position.
2. Switch the e-bike off and on.
3. Turn the crank with the gearshift set to medium speed. Repeat this process
until you find the correct position for the Rim Magnet Simulator.
SIGNAL
NO SIGNAL
conectors
IDEAL
POSITION
NO SIGNAL
2024-05
Manuales relacionados para speedbox Rim Magnet Simulator
Resumen de contenidos para speedbox Rim Magnet Simulator
- Página 1 ▶ The signal range extends up to 30 mm from the motor. If an error occurs, please follow these steps: 1. Leave the Rim Magnet Simulator in the same position or adjust it as needed. Refer to the provided picture for the ideal signal position.
- Página 2 2. Spegnere e accendere l‘e-bike. 1. Pozostaw Rim Magnet Simulator w tym samym miejscu lub przenieś go w inne 3. Girare la pedivella con il deragliatore impostato su velocità media. Oppure miejsce.