Idiomas disponibles
Idiomas disponibles
B
Assembling and disassembling the trimmer
(See Fig. C1, C2, C3)
1. Remove the protective cap from the end of the
attachment shaft.
2. To assemble, align the triangle icon on the button
with the arrow label on the attachment shaft.
3. Push the shafts together until you hear a "click".
The edge of the arrow label should be close to
the shaft connection housing.
4. Finish the assembly by tightening the knob
clockwise.
EN
5. To disassemble, loosen the knob, turn counter
clockwise, then press the release button and
pull the shafts apart. Replace the protective cap
on the attachment shaft to ensure that dust and
debris do not get into the shaft.
C1
10
C2
2
C3
3
2
Fitting the shoulder strap (Sold Seperately)
(See Fig. D)
D
1. Adjust the length of shoulder strap to make sure
that the carabiner is about a hand's width below
the top of your hip.
2. Connect the carabiner of the accessory shoulder
strap to the mounting point on the shaft of the
trimmer.
Installing & removing the battery pack
(See Fig. E1, E2)
3
1
1
