Nexigo Iris Manual Del Usuario página 22

12. Mute Button
Press to mute or unmute the webcam's microphone.
13. Backlight Compensation (BLC) Button
Press to turn on BLC, then press again to turn it off.
14. Numbered Buttons (0-6, I-IV)
The numbered buttons (0-6, I-IV) can be used to set and recall the preset position, and the
numbered buttons (I-IV) can set a remote control or camera address for a multi-cam setup.
Setting the Remote Channel:
Press and hold one of the numbered buttons for four seconds (I, II,III, or IV) to change to a
new channel. The red indicator light will start flashing rapidly. Once the flashing slows, that
will indicate it has changed channels. The remote can now control the camera at the
corresponding frequency.
【I】 : Press and hold for at least four seconds to switch the remote channel to No.1.
【II】 : Press and hold for at least four seconds to switch the remote channel to No.2.
【III】 : Press and hold for at least four seconds to switch the remote channel to No.3.
【IV】 : Press and hold for at least four seconds to switch the remote channel to No.4.
EN 19 US 01