Idiomas disponibles
Idiomas disponibles
Charging a Hot Battery Pack
When using a tool continuously, the battery pack may become hot. A hot battery pack may be placed directly
onto the charger port but charging will not begin until the battery temperature cools to within acceptable
temperature range. When a hot battery pack is placed on the charger, the red and green LED lights will be
flashing alternatively. When the battery pack cools, the charger will automatically begin charging. It is
advisable to remove the battery from the charger and allow ample time for cooling so the battery can be fully
charged without interruption.
Charging a Cold Battery Pack
A cold battery pack may be placed directly onto the charger port but charging will not begin until the battery
temperature warms to within acceptable temperature range. When a cold battery pack is placed on the
charger, the red LED and green LED will be flashing. When the battery pack warms, the charger will
automatically begin charging.
After the battery has been fully charged, the LED lights will remain on until the charger is disconnected from
the power source. Output current from the charger stops an hour after the battery is fully charged.
If the red and green LED lights keep flashing for over two hours and the charger still cannot resume charging,
please replace battery.
WARNING:
When servicing, use only identical replacement parts.
Use of any other part may create a hazard or cause
product damage.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc. come
in contact with plastic parts. They contain chemicals
that can damage, weaken or destroy plastic.
SERVICE
Now that you have purchased your charger, should a need ever exist for repair parts or service, simply contact
us at
1-800-618-7474. Be sure to provide all pertinent facts when you call or visit.
The model number will be found on a plate attached to the bottom of the housing.
• NAME OF ITEM
• MODEL NUMBER
• SERIAL NUMBER
Call us first with questions about operating or maintaining your charger
at 1.800.618.7474 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time,
OPERATION
MAINTENANCE
BATTERY CHARGER
CHL84000
CALL US FIRST !!
or get assistance on scotts.americanlawnmower.com.
Model CHL84000
DO NOT abuse power tools. Abusive practices can
damage tools as well as the workplace.
WARNING:
Do not attempt to modify or create accessories not
recommended for use with this charger. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
6
