Idiomas disponibles
Idiomas disponibles
Power saving mode:
• If no key is pressed on the device for 30 seconds, then all
the LED lights will automatically turn off except the battery
LED light. An LED light will come on when the USB cable is
used to charge the device or any key is pressed on the device.
• If there is no Wi-Fi access used on the device for 10 mins,
Internet network dialling will disconnect automatically and
will connect automatically once any key is pressed on the
device or Wi-Fi is accessed from the device.
• If there is no Wi-Fi access to the device for 30 minutes, then
all LED lights will be automatically turned off along with the
Wi-Fi AP function. Press any key to restore the Wi-Fi AP
function.
1.5 Installing the device
Step 1: Open the back cover.
Note: We suggest that you put the tips of both thumbs into the
hole slot at the same time and pull the cover outwards to open it.
EN - 9
