Narwal Freo X Plus Manual Del Usuario página 7

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
C.Leave other doors closed and
install the fence to prevent the
robot from entering elevated or low
areas.
E.DO NOT stand in front of the robot,
on the threshold or in narrow aisles to
avoid omission.
D.The maximum obstacle crossing
height is 20mm and the robot
cannot enter rooms with a threshold
height of over 20mm. You can
purchase Narwal Threshold Ramp to
help the robot climb over and
around obstacles more e iciently.
3.2 Mapping
Before cleaning a new home, the robot needs to explore the environment and
create a map. Before first-time cleaning, you can trigger mapping by short
【Start/Stop bu on on the robot or tapping "Start Mapping"
pressing the
in the App.
Note:
1.Once a map is created, it can be edited in the App.
2.Please DO NOT move the base station after a map is created, or you have to
restart mapping. If large furniture in your home is rearranged, it is
recommended to create a new map.
3.3 Cleaning
Select cleaning modes
The product comes with four built-in cleaning modes: Vacuum, Mop, Vacuum
and Mop, and Vacuum then Mop. You can select and adjust parameters like
cleaning cycles, suction, and mop humidity for each mode in the App.
Set Freo Advise
Freo Advise is an intelligent cleaning assistant. When the Freo Advise mode is
on, the robot can intelligently set cleaning parameters. You can enable Freo
Advise after selecting the cleaning mode in the App.
Start cleaning task
You can start the robot for cleaning in the following two ways:
【Start Cleaning in the App
•Tap
【Start/Stop bu on on the robot and the robot will
•Short press the
activate the Vacuum Mode by default;
Note: You can adjust the cleaning mode and set more cleaning parameters in the App.
06
loading

Productos relacionados para Narwal Freo X Plus

Este manual también es adecuado para:

Yjcc018