Project Source 67222W-2001 Instrucciones De Montaje página 5

ASSEMBLY INSTRUCTIONS
3. Push the quick connector (C) firmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been made.
Open the weight (F) in the direction shown, install the
weight (F) at the point of the hose marking "weight
here".
4.
Making the water supply connections:
Use 1/2 in. I.P.S. faucet connections (2), or use supply
line coupling nuts (3) (not included) with a 3/8 in. O.D.
ball-nose riser (1). Do not overtighten.
Note: The hot side inlet tube is indicated by a red ring.
3
4
1
3
5
H F
Push
H F
2
1
H C