Idiomas disponibles
Idiomas disponibles
3.4/ AUTOMATIC REVERT-TO-TRANSMIT MODE
In the event of a secondary avalanche, the automatic re-
vert-to-transmit mode allows the device to automatically
switch back to transmitting a signal. The EVO BT is equipped
with a movement sensor that allows it to determine if the res-
cuer is immobilized and buried. The time lapse to automati-
cally revert to transmit mode can be set to 2, 4, or 8 minutes
through the device settings menu, or simply disabled alto-
gether (see paragraph 1.5/ DEVICE SETTINGS).
The default setting is 2 minutes for the
device to automatically revert to transmit
mode. If the device detects no movement
during a 2-minute period, it will beep
and ask the rescuer to confirm that they
would like to continue in search mode.
Press on the marking button to confirm
that you are not buried. If no action on
your part is detected, the device auto-
matically reverts to transmit mode.
13
4/ PROBING - SHOVELING
The probe pictogram (probing) appears
when the device is less than 1.2 m from
the burial (or 2 m if the user has set the
fine search distance to 5 m).
Before you start the probing - shoveling phase, make sure
you place your device properly in the holster, well-protected
from the cold and impacts. As soon as you have defined the
area where the victim is likely to be buried, it is quicker to
start probing. Search for the burial by probing perpendicular
to the slope. Move out gradually in a spiral from the minimum
distance point detected by your transceiver.
EN
