Idiomas disponibles
Idiomas disponibles
• Do not connect or disconnect the XRSD while the inverter is running. And turning off
the inverter and/or the XRSD products may not reduce this risk. After disconnecting
all power sources, internal capacitors within the inverter can remain charged for
several minutes.
• If service is required, verify capacitors have discharged by measuring a voltage across
inverter terminals before disconnecting wiring.
• After rapid shutdown activation, wait 30 seconds before disconnecting DC cables or
turning off DC disconnect switch.
• Do not disconnect the PV module from the XRSD without first disconnecting the AC
power of the XRSD-Core Kit.
• Make sure that the emergency stop button is pressed to cut off the AC power during
installation.
• The power supply of the XRSD-Core Kit MUST be on the same AC branch circuit as
the inverter in order to meet the rapid shutdown requirement.
• Do not touch the XRSD when it is running. Surface high temperature may cause
burns or personal injury.
• Do not attempt to repair the device if it is not working properly, please contact the
SolaX Customer Support team. Any attempt to repair the XRSD will automatically
void the warranty.
• Keep the products away from children.
• All the labels and nameplate on the product shall be maintained clearly visible.
2
DANGER!
WARNING!
CAUTION!
NOTICE!
