DEVICE OVERVIEW
See technical figures on cover pages.
1.
Impact resistant polycarbonate
base layer
2. Scratch & scuff resistant lens
3. Incident exposure indicator LED's
4. Device Power On/Off indicator
5. Audio recording indicator
6. Low Battery indicator
7.
Power/Record button
8. Model Identification
9.
Strap harness attachment point
RF MONITOR OPERATION
Prior to entering an area where
‚
transmitting antennas could be
present be sure to switch your
fieldSENSE 2.0 on.
Switch the fieldSENSE 2.0 on by
‚
pressing and holding the On / Off
button for approximately 1 second.
The LEDs illuminate in sequence
‚
followed by a BEEP. Once on, the
power indicator will flash.
ALWAYS ADHERE TO THE RELEVANT SAFETY REGULATIONS
PERTAINING TO RF EXPOSURE IN THE COUNTRY OF USE.
2
10. Device serial number and barcode
11. Heavy duty shock absorbing
elastomer outer layer
12. Lanyard attachment point
13. USB connection for data logging
(NOT FOR CHARGING)
14. Date Calibration Expires
15. Tripod attachment point
16. AAA Alkaline batteries (LR03)
17. Battery lid removal screws (M2)
The battery indicator will illuminate
‚
should the batteries be low. Replace
the batteries with AAA alkaline
batteries (non-rechargeable).
An audible alarm is sounded when
‚
the exposure level rises above 50%.
The necessary precautions need to
‚
be taken when the exposure level
exceeds 100%.
