Idiomas disponibles
Idiomas disponibles
Maintenance + Care
Follow the steps below if the sprinkler stops working or exhibits
poor water quality due to debris or dirt build-up.
1. Remove the inlet filter from the hose-end of the oscillator and
run under water (Fig. 3).
Fig. 3
hose-end
2. Remove the cleaning pin from the opposite end of the
oscillator (Fig. 4).
Fig. 4
cleaning
pin
3. To flush, connect the oscillator to a spigot. Turn on the faucet
and while the water continues running, spin the tube gently
back and forth for few minutes. Then screw the inlet filter
firmly back in place (Fig. 5)
Fig. 5
hose-end
inlet filter
inlet
filter
tube
4. Use the provided cleaning pin to clear any clogs from the
spray nozzles. Fit cleaning pin firmly back in place before
using the sprinkler (Fig. 6).
Fig. 6
Storage
Drain the sprinkler after use. DO NOT allow water to freeze in the
sprinkler (Fig. 7).
Fig. 7
Service + Support
If your Aqua Joe
SJI-OMS20 oscillating sprinkler requires
®
service or maintenance, please call All Season Power customer
service at 1-866-225-9723 for assistance.
Model + Serial Numbers
When contacting the company or arranging service from an
authorized dealer, you will need to provide the model and serial
numbers, which can be found on the decal located on the
sprinkler. Copy these numbers into the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
S
J
I
-
O M S 2 0
Serial #:
3
cleaning pin
