Idiomas disponibles
Idiomas disponibles
Comfort liner removal.
Fig. A
Fig. B
Fig. C
The comfort liner is fixed inside the helmet by a velcro. Remove it pulling gently inward.
Make sure to position the liner correctly once you change it.
Remove the cheeks/neck-roll stripe unfastening the four press studs on each side (A), detaching the velcro strips and pulling out
the stripe from the shell. To replace the stripe, position the velcro (B) and fasten the studs. Position the neck-roll plastic guide (C)
between the shell and the EPS and fix the cheek on the other side.
WARNING: The interior padding is critical to maintain the correct fit of the helmet on your head. If you have any doubt whatsoever regarding the
removal or replacement of the interior padding, do not use your helmet. Contact your retailer for assistance or advice. Never use your helmet
with any part of the interior padding removed. The helmet will not protect you in an accident.
10
