Idiomas disponibles
Idiomas disponibles
Protection Cap
1
Measuring Probes
2
Display
3
ON / SET Button
4
Battery Compartment Cap
5
DISPLAY SYMBOLS
Display
A
Material Moisture Symbol
B
Battery Icon
C
Wood Moisture Symbol
D
Temperature Measuring Unit
E
Moisture Content in %
F
Display Backlight
G
Material Moisture
Selecting the Measuring Mode
Peel off the display protection foil before using the unit.
Hold the button ON/SET (5) pressed for 3 seconds. Now one of the 4 possible symbols (tree, wall,
•
°C, °F) is flashing. By pressing the button several times you will switch through the measuring
modes.
After selecting a measuring mode, the resp. symbol appears on the display and starts flashing.
•
Wait for approx. 4 seconds until the setting is stored and the measuring mode is activated.
Take off the protection cap of the measuring probes in order to undertake a measurement.
•
Display Backlight
When the ON/SET button is pressed, the display backlight (G) is switched on for approx. 3
•
seconds.
Automatic Power-Off
•
In wood moisture and material moisture measurement mode the unit automatically turns off after
•
15 seconds, if no measurements are undertaken or the reading does not change.
In temperature measurement mode, the unit automatically turns off after approx. 15 seconds.
•
In any mode, after the battery icon (C) appears, the unit automatically turn off after 15 seconds.
•
Replace the batteries as soon as possible.
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Wood Moisture
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
Temperature °C
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Temperature °F
