Idiomas disponibles
Idiomas disponibles
Care and cleaning
Always switch off the appliance before cleaning and always disconnect the mains
Cleaning the cover grille
To ensure that the air cooler works efficiently, you should clean the cover grilles
after each week of operation.
Use a screwdriver to remove the two locking screws on the cover grille and
remove the cover grille from the unit.
Use a hoover to remove the dust accumulated in the cover grille.
If the cover grids are very dirty, soak them in warm water and rinse them several
times - but the water temperature must not exceed 40 °C.
Before putting the cover grids back into the unit, let them dry thoroughly after
washing.
Replace the cover grilles and secure them with the locking screws.
NOTE: Never use the unit without the cover grids!
Cleaning the housing
Before cleaning, switch off the unit and wait a few minutes before unplugging it to
disconnect it from the mains power supply.
Clean the unit with a moderately damp cloth and then wipe it with a dry cloth.
•
Never use petrol, alcohol or solvents to clean the appliance.
•
Do not spray insecticides or similar agents into the air cooler.
Emptying the water tank
It is recommended to empty and clean the water tank every 2-3 weeks during use.
Follow these steps:
•
Remove the water tank from the machine.
•
Remove the water pump by taking it out of the fuse holder.
•
Then remove the water tank completely from the machine.
IMPORTANT NOTICE:
plug from the socket.
179
