Note: If more than one cooking zone has a timer setting, the timer indicator
will show the lowest time. The red dot next to the power level indicator will
flash.
RESIDUAL HEAT WARNING
Be careful with hot surfaces
When the board has been running for some time, some residual heat will remain. The letter
"H" appears on the setup indicator to warn you to stay away from him.
It can also be used as a power saving function:
If you want to heat more pans, use the cooking zone that is still hot.
AUTOMATIC SAFETY SHUT OFF
Another safety feature of the board is the automatic shutdown. This happens every time
you forget to turn off a cooking zone. Default shutdown times are shown in the following
table:
Auto power off time (hours)
PROTECTION AGAINST OVERHEATING
An equipped temperature sensor can monitor the temperature inside the plate. When
excessive temperature is controlled, the hob will automatically stop its operation.
PROTECTION AGAINST OVERFLOW
For your safety, the programmer will automatically turn off the power if the liquid boils or if
you wet a cloth on the touch control panel. All control buttons will become invalid except the
on/off button and child lock unless you dry the touch control area.
COOKING GUIDELINES
Be careful when frying, as oil and fat heat up quickly, especially if you use the Turbo
function. At extremely high temperatures, oil and grease ignite spontaneously and this
presents a fire hazard.
Cooking tips
Energy saving
•
When the food comes to a boil, reduce the power.
•
Using a lid will reduce cooking times and save energy by retaining heat.
•
Minimize the amount of liquid or fat to reduce cooking times.
•
Start cooking at a high power level and then reduce the power level when the food is
heated.
Power level
1
2
3
8
8
8
15
4
5
6
7
8
4
4
4
2
2
9
2