Idiomas disponibles
Idiomas disponibles
Operation
Connect the air valve
1
A.
Connect the nozzle directly
to the valve
Adjust the nozzle mode and
connect it to the valve.
Keep a tight grip on the nozzle
while in ating.
Note：
Always loosen
the nut rst.
Power on and set target air pressure
2
Long-press the Power button to power
on, and the screen illuminates, showing
the real-time air pressure reading.
Press '+' and '-' together to switch
between PSI and BAR. Adjust target
pressure using '+' and '-' buttons. The
set pressure will display for 3 seconds
before reve ing to current pressure.
In ating
3
Press the Power Button to sta in ation. It will auto
shut o when the target air pressure is reached.
Shut down
4
Long-press the Power Button to power o . If the air
pump is not sta ed and there is no operation within
1 minute while it is powered on, the air pump will
automatically shut down.
B.
Use the hose
Hold the hose and the suitable
adapter, then connect it to the
valve. it's recommended to use
the hose when using Schrader
valve.
For Schrader Valve
EN
03
For Presta Valve
For Ball Valve
Pressure
Value
Pressure
Unit
Batte
Level
