Waldbeck Heavyload Manual Del Usuario página 5

Note: Loosely tighten all screws at first during assembly. Tighten all screws
at the end. It is recommended to assemble this wheelbarrow in pairs.
The wheelbarrow basically consists of the parts: Tub, Base, Handle(s), Front
Axle and Wheels.
Put all parts together as shown in the drawing on the left and connect:
• The two foot parts with the M8 x 40 screws (2).
• Handle(s) and axle with the M8 x 45 bolts and nuts (3).
• The tub with the M8 x 25 screws and matching nuts to the base (1).
• Then fix the wheels to the axle with the washers and pins (4).
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Ltd
PO Box 1145
Oxford, OX1 9UW
United Kingdom
EN
5