Idiomas disponibles
Idiomas disponibles
ENGLISH
Plastic Welding Gun Instructions
I. TECHNICAL PARAMETERS
Input Voltage
Input Current
EU 220(V)
0,5(A)
US 110(V)
0,5(A)
II. SAFETY GUIDELINES
Caution
Read this manual carefully before using this tool and follow the basic safety guidelines to reduce the risk of fire, electric shock, and personal injury. Keep
the instructions for future reference.
1. Keep the workplace clean and tidy. A cluttered workplace is prone to hazards.
2. Check the working environment before working. Do not use it in places with water or moisture. Do not use it near flammable liquids or gases.
3. When moving the tool, do not pull the power cord, and do not let the power cord come into contact with a heat source or oil.
4. Use an appropriate extension cord when working outdoors.
5. To avoid electric shocks, the body should not be near grounded objects, such as pipes, heating furnaces, and refrigerators.
6. Keep children and others away from the workplace and tools. When the tool is not in use, disconnect the power cord from the power outlet and place it
in a high place out of the reach of children.
7. Secure the workpiece with an iron hoop or a bench vise; do not hold it by hand.
8. Pay attention to the state of use, stay alert, and avoid using tools when tired.
9. Do not rush when working; maintain balanced operation at all times.
10. Carefully maintain the tool to ensure good performance. Follow the instructions for adding lubricant and replacing original parts. Be careful to keep
the power cord intact. If it is damaged, replace it immediately. Keep the handle dry, clean, and free of oil.
11. Before using the tool, check if it is damaged and if spare parts are loose or missing.
12. Turn on the power when the tool switch is off. When using or replacing parts, cut off the power source and unplug the power cord from the power
outlet.
13. The use of unqualified accessories can pose a hazard; replace accessories with the original specifications.
14. Use the tool within the design range and do not overuse it to ensure normal efficiency and work safety.
15. When working for a long time, use protective equipment such as eye masks and earplugs.
16. This product has its own overheating protection function, which stops working after overheating and resumes operation after cooling down.
III. ADDITIONAL INSTRUCTIONS FOR SAFE OPERATION
1. Select the power source according to the voltage used in the tool.
2. Always grip the tool securely when using it in high places.
3. Do not put the tool away until it is completely cool.
IV. SAFETY GUARD FOR PLASTIC WELDING GUNS
1. Do not aim the wire of the plastic welding gun directly at people and animals.
2. Do not use it near flammable or combustible gases.
3. Do not touch the welding wire when the plastic welding gun is in use or immediately after use. The plastic welding gun handle should be kept dry.
4. The plastic welding gun should cool down completely before storing.
Output Power
Output Voltage
Output Current
0-100(W)
0-5(V)
0-65(A)
0-100(W)
0-5(V)
0-65(A)
V. FUNCTION OF PLASTIC WELDING GUN
Function 1: Plastic welding (without nails), filler welding, hole filling, and gap elimination.
Function 2: Nail implantation. With various repair nails, you can repair horizontal, vertical, long, and short cracks. Function 3:
Thermal smoothing. Heating the plastic smoothens, welds, doubles in strength, and adds beauty. Function 4: Thermal cutting. It can
be used for thermal cutting, flat cutting, and automatic sealing of plastic cords.
Function 5: Tin welding heating/cooling is faster, more efficient, and saves more energy than general welding machines.
VI. SELECTION OF WELDING NAILS FOR PLASTIC WELDING
VII. MAIN USE OF THE PLASTIC WELDING GUN
Bumper
Chair
VIII. SAFETY ALERT
This device may be used by children aged 8 and over and by persons with reduced physical, sensory, or mental capabilities or lack
of experience and knowledge, provided they have received supervision or instructions on the safe use of this device and understand
the dangers. Children should not play with the device. Cleaning and user maintenance should not be carried out by children without
supervision. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person
to avoid hazards.
Wear safety
IX. INSTRUCTIONS
glasses when
using the tool.
1. After installing the welding pin, turn on the electric heating for 5 seconds, insert the heated welding pin into the plastic product to
be repaired, release the switch, cool for 45 seconds, wrap the welding pin with the repair plastic, and then remove the welding gun.
2. After installing the welding blade, turn it on and heat for 15 seconds, so that the plastic products to be repaired are heated and
flattened. After completing the heating and leveling, cool for 45 seconds and then proceed with other plastic repair work.
3. The welding blade is suitable for the high-power DH-B100 plastic welding gun but not suitable for the low-power DH50 plastic
welding gun.
Selection of the type of welding nail for plastic welding.
Scissors
Fan
With the patented groove design,
remove the excess material by hand.
rev.1
