Leba Notecart Unifit Serie Guia Del Usuario página 13

Plinth stander
The Plinth stander is a substitute to the Notecart Unifit wheels, and is used to convert the Notecart
unifit into a standing furniture. It is recommended to use a Notesecure instead where possible, as
the plinth solution removes the ability to move the Notecart Unifit around and access the backdoor
electronics if placed against a wall.
Switch mounting
The Notecart Unifit is prepared for a Switch solution. A switch can
be installed onto the back door via purchase of a Switch mount
bracket plate. Mount the switch onto the switch mount plate, and
then install the plate onto the backdoor of the Notecart Unifit,
using supplied nuts.
It is recommended to use a 90° bended C13 plug cable for the
switch for optimal positioning on the back door.
Use the Lan connection unit placed in the Notecart Unifit on the
right side above the main on/off switch to gain LAN access into
the Switch.
13