iOttie iTap 3 Manual Del Usuario página 5

02 Installation
Attaching the Mount
1. Choose a
mounting location
and wipe the
surface clean.
2. Connect the
cradle to the flush
mount and tighten
the cradle knob.
3. Peel off the film
on the base of the
flush mount.
8 EN
4. Press the flush mount
evenly onto the
mounting location
for 30 seconds. Wait
20 minutes before
mounting your phone.
• The adhesive base features a semi-permanent tape.
Once the mount is removed, it cannot be re-mounted.
• When mounting, it is recommended that the surface and
product be above 65°F.
• When removing the flush mount, please use caution.
We recommend removing slowly from the edge to avoid
damage.
5. To change the viewing
angle, loosen the cradle
knob and adjust the
mount to your desired
position. Tighten to
secure it in place.
20
min
9