iGPSPORT iGS800 Manual De Uso Rápido página 3

After successful pairing, the device and the smartphone will be automatically connected via
Bluetooth; if it fails, you can try to restart the smartphone Bluetooth, the iGPSPORT APP or the
cycling computer for pairing again.
Remove Pairing
If you want to pair your cycling computer with another smartphone, please remove the current
pairing first:
�.Go to System Menu > Pair Phone to view the paired device list.
�.Select the device you want to delete, click Unpair Phone and press to confirm.
�.When the deletion is completed, the bike computer will restart automatically and Bluetooth
Disconnected icon will be displayed on the device.
Note：
�. Please pair the device based on the instructions in the iGPSPORT APP, rather than using the
Bluetooth settings on your smartphone.
�. Ensure that your smartphone is connected to the internet and that Bluetooth is enabled.
�. Download the iGPSPORT APP from the AppStore or GooglePlay.
�. For Android users, make sure to enable location permissions for the iGPSPORT APP in your
phone's app settings.
�. Do not pair and unpair the device frequently.
Firmware Update
To keep the device's best performance, please update its firmware timely when a new version is
available.
�. The device will automatically check for firmware updates when connected to Bluetooth or Wi-Fi.
�. Alternatively, you can manually check for updates by going to the iGPSPORT APP > Device >
Firmware Update.
�. Depending on the strength of the Bluetooth signal, it may take up to �� minutes. Please be patient
during the process.
Installation of standard bike mount
Use the included rubber bands to attach the standard bike mount to the bike stem.
�） Place the rubber disk on the back of the standard bike mount.
�） Select a suitable place on the bike stem to place the rubber disk and the standard bike mount.
�） Loop the two rubber bands around the bike stem respectively, hook the buckle of the bike mount
and fix it on the bike stem.
�） Align the tabs on the back of the device with the standard bike mount notches.
�） Place the device on the bike mount and rotate it by �� degrees.
Note：
It is recommended to use iGPSPORT Standard Bike Mount or Out-Front Mount to avoid damaging
the tab of the cycling computer.
For more information
Please visit the iGPSPORT official website for the user manual and software update information.