Tibret VI 437 Manual De Instrucciones página 2

Aspiradora recargable
Idiomas disponibles

Idiomas disponibles

PRODUCT CHARACTERISTICS
1.
This appliance is not intended for use by person(including children)with reduced physical,-
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction.
2.
Children should be supervised to ensure that they do not play with the appliance.
3.
If the supply cord of is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified.
4.
This appliance can be used by children from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
5.
Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children unless they are older than 8 and supervised.
6.
To avoid electrocution, do not immerse cord or appliance in water or other liquids. Also do
not expose to rain or damp conditions; Water entering the appliance will increase the risk of
electrocution.
7.
Do not leave cord hanging or on hot surfaces.
Unplug the appliance when you are not going to use it.
8.
The use of non-recommended accessories could cause damage to it.
9.
10.
Not suitable for external use.
11.
Do not place it on heat sources, such as ovens, gas cookers ..., etc.
Do not use near flammable materials such as curtains, fabric coverings, etc., to prevent fire.
12.
To unplug, pull the plug not the cable. Do not use the cord to transport the appliance.
13.
14.
Before plugging in the appliance, always check that the voltage of the machine matches
that of the mains electricity where you are going to plug it in.
Only suitable for domestic use, not for commercial or professional use.
15.
Cool the unit before storing.
16.
17.
If the appliance has a mobile socket, it must be removed before cleaning. The base of the
connector must be removed before using the appliance again. Only the appropriate mobile
socket should be used.
-
loading