Idiomas disponibles
Idiomas disponibles
4. How to assemble the Door
To attach on Door Panel, push Sliding Latch
in the direction of arrow until you hear a click
sound.
X There is a front and back on the Door Panel.
Make sure the Sliding Lock faces front.
4-2. Attach Door Panel to Front Panel.
① Hook Sliding Lock (from Step 4-1) to the top
of horizontal Wire Slat on Front Panel.
@ Hook Sliding Lock to the bottom of horizontal
Wire Slat on Front Panel.
© After Step ©, attach Sliding Latch to Wire
Slat on Door Panel until you hear a click
Front Panel (The top of horizontal Wire Slat)
4-1. Attach the Sliding Latches on both sides of Door Panel.
Door
Sliding Lock
Door Panel
Front Panel
(The bottom of
CR
Sliding [Latch
Door Panel
sound using the same step as 4-1.
How to open/close Door
O Lift up the Sliding Lock @ Then slide the Door to open
Side Panel B
How to clean
horizontal Wire Slat) 7 ~
mr
RONA AE
EI
O Slide the right and left Locks upward.
@ Open Side Door.
@ Hooking Locks at the top of wire keeps Side Door open.
Side Door for
exchanging training
tray/food & water bowls
Use Hook arrow to keep the Door open.
SY)
y -
2%
"iy
マン
ーー
NN
>>
LE
※Able to attach Side Panel B to fixed frame
5
as well depending on where Pen is placed.
* Reverse the steps to disassemble this product.
@Use a mild detergent and water and clean with a soft cloth/sponge. Cleaning with a scrub brush and/or using a polishing powder
may cause scratched, rust and/or discolor this product.
@When using creosol or other disinfectants, make sure to dilute them, otherwise damage to the wooden finish or discoloration may
occur.
@Do not use harsh chemicals such as thinner, benzene or alcohol as these may cause damage/discoloration to the finish.
@After cleaning, wipe dry with soft cloth or place in a shaded area to air dry; do not place this product in direct sunlight to avoid
damage/discoloration to the finish.
Specifications
UPC/JAN
803840 94920-7 / 4973655 50401-7
803840 94921-4 / 4973655 50411-6
Pen
35.4 - 60.6"W x 23.6"D x 23.6"H
35.4 - 60.6"W x 31.1"D x 27.8"H
Dimensions | Tray
37 - 62.2"W x 24.6"D x 1"H
37 - 62.2"W x 32.1"D x 1"H
Crate with Tray
37 - 62.2"W x 24.6"D x 24"H
37 - 62.2"W x 32.1"D x 28"H
Materials
Frame: Rubber Wood (Lacquer finished)
Tray - Door Sliding Lock : Sliding Latch: ABS
Wire: Steel(Polyester coating)
Rubber Skid: Elastomer
Appropriate pet weight
Small dogs
8.8 - 26.4 lbs.
Small to medium dogs
8.8 lbs. - 44 Ibs.
@Please note that product specifications and design may change
without prior notice for the purpose of quality improvement.
@may be coating cracks at some joints and each product may
experience different coloration of the wood grain as frames are
made of natural wood.
elf you find something wrong with this product, please let us know.
Thank you!
-4-
For USA Customers
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795
Fax (972) 641-8495
Visit us at www.richellusa.com
Made in China
