Hohem MIC-01 Manual Del Usuario página 14

TX and RX Pairing
（Please make sure that the RX receiver is already plugged into your
recording device.）
a. After powering the TX on, it indicates
that the RX has successfully paired
with TX when both the status light
on TX and the CH1 indicator remain
steady.
b. The CH2 indicator will blink for 30s
and automatically turn off.
If pairing is unsuccessful or if pairing is cleared, the indicator lights will
start blinking.
To reset the existing pairing and re-
pair the devices, follow these steps:
a. Press and hold the "-" button on RX
for 3s. The CH1 indicator light will
flash rapidly.
b. Simultaneously, press and hold the
Mode Button on TX for 3s. The TX
indicator light will flash rapidly.
c. When both TX and CH1 indicator lights
are steady, indicating a successful
pairing.
Please scan the QR code
for tutorial videos.
EN 12