Disclaimer
Congratulations on purchasing your new DJI
practices DJI provided carefully before use. Failure to read and follow instructions and warnings may result in
serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By
using this product, you hereby signify that you have read this document carefully and that you understand
and agree to abide by all terms and conditions of this document and all relevant documents of this product.
You agree to only use this product for proper purposes. You agree that you are solely responsible for your
own conduct while using this product and for any consequences thereof. DJI accepts no liability for damage,
injury, or any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI") and its affiliated companies. Names
of products, brands, etc., appearing in this document are trademarks or registered trademarks of their
respective owner companies. This product and document are copyrighted by DJI with all rights reserved.
No part of this product or document shall be reproduced in any form without the prior written consent or
authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion of DJI. This
content is subject to change without prior notice. For up-to-date product information, visit www.dji.com and
go to the product page for this product.
Warning
1. Read these instructions carefully before use. Failure to follow the relevant instructions may result
in property damage, personal injury, or death. The warnings and precautions in this manual do not
cover all possible situations and the user must practice common sense in relation to the product that
is not mentioned in this manual and maintain a cautious attitude.
2. Only qualified electricians wearing insulated gloves can perform the fast charging connection.
3. When using the fast charging connection, the input current required by the power supply exceeds
16 A.DO NOT connect the fast charging cables to 16A or 10A power outlets. DO NOT use the fast
charging cables indoors.
4. DO NOT use two slow charging cables simultaneously indoors.
5. DO NOT use the fast charging cable together with the slow charging cable.
6. When using the C10000 Intelligent Power Supply with a mains power supply for fast charging, make
sure to connect the power supply to a three-phase five-wire industrial power supply that has a rated
output of 18 kW or above.
7. To use the C10000 Intelligent Power Supply with a third-party generator, make sure to purchase a
single-phase generator that has a rated voltage of 220 V and rated output of 12 kW or above.
8. To disconnect or reconnect the connector between the DC module and the AC module, disconnect
the power supply from power source first. DO NOT perform this operation while the power supply is
running.
9. DO NOT use the power supply under direct sunlight, during a thunderstorm, or in other wet environments.
10. The power supply should be kept in an environment with a temperature range of 23° to 104° F (-5° to
40° C).
11. Keep the power supply away from heat, pressure, water, flammable gases, and corrosives.
12. Keep the power supply away from inflammable materials while charging. DO NOT place the power
supply or charging batteries on a blanket or any carpeted surfaces when in use.
13. Place the power supply on a flat and stable surface. In order to prevent fire hazards, make sure the
device is properly insulated and that there is at least 50 cm of space for ventilation.
14. DO NOT use the power supply in an area where batteries are stored. There should be a distance of
at least 30 cm between the power supply and any charging batteries. Otherwise, the power supply or
charging batteries may be damaged by excessive heating and may even lead to a fire hazard.
15. Refer to the user guide of the batteries for more safety instructions before use.
2
TM
product. Read this entire document and all safe and lawful