Idiomas disponibles
Idiomas disponibles
2. Press the M button
„M+" appears in the display
measured volume is saved.
3. Press the MODE button
product is now ready for the second
measurement.
4. Measure the next volume.
5. Press the + / = button
sage „+" appears in the display.
6. Press the RM button
the first measurement is shown in the
lower row of the display.
7. Press the + / = button again. Both
measurements are added and the
result is shown in the lower row of the
display.
8. Repeat steps 2 to 7 to add further
measurements.
9. Press the MODE button to leave the
addition mode. All the measurements
will be deleted.
Detection of various
objects
The detection of hidden objects is the
same in all three modi (STUD, AC WIRE,
METAL).
Please note: Test the product before
initial use on a metal pipe or AC wire
whose position you know exactly.
1. Slide the function switch
position „DETECTOR".
2. Slide the material switch
position STUD, AC WIRE or METAL
(wood, AC wire or metal).
. The message
7
2
. The
4
. The mes-
12
. The result of
10
to the
9
to the
3
GB/IE
. The
47
