Cycles, Options nndLights
Cycles
Choose the cycle that best describes your dishload
by pressing the cycle select pad. (See page 3, Operating Tips,
for how to begin the cycle).
Heavy
Long cycle for heavy food soils.
132"
2 washes/3 rinses
Medium cycle for average food soils.
Normal
The turbidity sensor is active with this
97-117"
1-2 washes**/1-2 rinses**
cycle.
Light
Short cycle for light food soils.
82*
1 wash/2 rinses
Rinse Only
Rinses dishes being held until there
9
1 rinse
(select models)
is a full load.
Includes approximately 30 minutes of dry time.
**Number of fills will vary depending on the soil level of each load.
I Note:
Depending
on water temperature,
there may be time added to the cycle to bring water up to temperature.
Options
In addition
to choosing
a cycle, choose as many available options as are needed
for your dishload.
Hi Temp Wash provides additional heat during tile wash portion of tile cycle,
All cycles
Hi Temp Wash
which ensures proper water temperature for better cleaning and drying results.
(except Rinse Only
It also adds an additional rinse to the cycle which improves results in hard
[select models])
water situations.
For enhanced drying results select this option. When Heated Dry is not
selected, towel drying of some items such as plastic and items with non-stick
All cycles
Heated Dry
surfaces may be necessary and more moisture may be noticed adhering
(except Rinse Only
to the dishwasher interior. In models with plastic interiors, it is normal to
[select models])
notice vapor escaping from the door vent as the heat dries your dishes. Vapor
will escape even if Heated Dry is not selected.
Used to automatically start the cycle at a later time. See page 7
All Cycles
Delay
for instructions.
6